Cool-n-Save™ is an awesome new, patented product, that is actually based on the same scientific Principles that large corporations have used to save themselves money for years.
Installed in less than five minutes with no tools required, the Cool-n-Save™ system affixes to the top of most home air conditioning units. The system is activated only when the AC unit turns on; hot air from the condenser unit’s fan raises the flap on the patented Cool-n-Save™ control valve allowing water to flow to the misters that surround the AC unit. When the ultra-fine mist is released into the air, it evaporates almost instantly creating what is known as a “Flash Evaporation,” which literally sucks heat out of the air as water absorbs the energy it needs to evaporate. The result of the immediate evaporation constitutes a substantial drop in ambient temperature without wetness—up to 30 degrees Fahrenheit.
The Cool-N-Save(TM) system fits on top of most air conditioning units and expels a filtered, ultra fine mist around the AC unit, which creates a “chill zone.” This “chill zone” allows your air conditioner to work more efficiently and reduces the electricity it draws. This results in consumer savings and reduced CO2 emissions . The efficiency of the Cool-N-Save(TM) system has been scientifically proven by Tulane University .
Ed Begley, Jr. on Cool-N-Save™
I’ve been a quote-unquote “environmentalist” now for almost 38 years, but I’m always looking for new ways to save energy, reduce my carbon footprint, and save money! I always look for things that can give me immediate results with a short-term payback. And because the cheapest kilowatt of electricity is the one SAVED, I’m always looking for ways to CONSERVE first. The features in my home like recycled cotton insulation and double-pane windows are all designed to keep the house warm in the winter and cool in the summer while using the least amount of energy possible. Now, I’ve discovered a new weapon in the battle to save energy — Cool-N-Save™.
The Cool-N-Save(TM) is one of the most cost effective and simple ways to save energy.” – Ed Begley Jr.
The Cool-N-Save(TM) system has been rated by the US Department of Energy and EPA as an ENERGY STAR PARTNER . As a U.S. government backed and trusted symbol for energy efficiency, the ENERGY STAR PARTNER approval is paramount due to the strict guidelines and performance standards set to ensure the quality and integrity of their partners in the fight against climate change.
Visit www.GoGreenItems.com to grab your Cool-N-Save Air Conditioning Pre Cooling System for only $95.99
Saving The Earth One Item At A Time
havis said,
June 7, 2009 at 10:52 am
cute blog.
can you taech me how to built it????
keep posting
GoGreenItemsGirl said,
June 20, 2009 at 10:55 pm
Q: Will this create buildup on my condenser coils?
A: Without proper monthly maintenance, it is possible. Our proprietary filter works to prevent the small amounts of calcium, lime, or rust that can buildup on the coils. Although the water from the nozzles evaporates almost immediately, in certain climates, some wetness may reach the coils. Just to be safe,it is always a good idea to spray down the outside of your condenser monthly with a 50/50 mixture of water and white vinegar, and rinse it off. This is a good maintenance idea with or without the Cool-N-Save™ system attached.
Q: My nozzles are clogged, what can I do?
A: Although it is unusual there is a possibility that one or more of the misting nozzles may clog if there is a high amount of minerals in the water. If this happens, simply remove the nozzles, soak them in a Lime or Hard Water removal product (found at any hardware store) for about 5 minutes and replace them.
GoGreenItemsGirl said,
June 20, 2009 at 10:56 pm
During the product development phase of the Cool-N-Save™ system, our design team addressed the possibility of scaling on air conditioner condenser fins and coils. Scaling can occur when high levels of calcium are present in the water supply, causing calcium carbonate molecules to attach to a surface. These tiny crystals will continue to grow until treated, or scale will form.
To combat this problem our design team enlisted the help of some of the nation’s foremost experts in water treatment technology, including Paul Puckorius and Smart Release Technology™ to develop our water treatment filter. In addition to filtering out common sediment, the polyacrylate chemical used in the Cool-N-Save™ water treatment filter combines with scale forming molecules and distorts their geometry, preventing them from attaching to one another. The inhibited calcium molecules are dispersed through water and washed away, preventing them from adhering to the air conditioner’s heat transfer surface.
GoGreenItemsGirl said,
June 21, 2009 at 12:54 am
Oh Steve,
It’s hard to know if anything is true, unless you try the product.
Possibly this not the right product for you.
I do have many customer that are saving money with this product right now.
Try not to lose to much of your green in Vegas. Have a great weekend!